The RUBI spacers are, without any doubt, a really indispensable range for obtaining perfect finishes in any installation work of ceramic tile.
RUBI manufactures spacers for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.
The spacers for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The massive structure of the spacers for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing. These properties make spacers for joints of 1, 1.5, 2 and 3 mm are highly recommended for coatings with ceramic tiles of large formats.
The L (long) versions of the 2 and 3 mm spacers are perfect, both for cladding and for paving with large-format or rectified ceramic tiles, with a thin joint.
The internal geometry of the spacers for joints of 3 mm long and 4 mm has been designed to provide greater resistance to bending and crushing. These properties make the spacers for joints of 3 mm long are highly recommended for coatings with large format ceramic tiles.
The internal geometry of the joints for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent their crushing. This hollow design facilitates the entrance of the joint mortar and, if the type of installation permits, leave the spacer inside the installation joint without affecting the integrity of the joint in the future.
The RUBI reinforced 5 mm spacers are crosspieces with greater rigidity, specially designed for use on large-format floor tiles. The underside of the reinforced 5 mm spacers is designed to offer a good settlement in the grip material and to facilitate, if the type of installation allows it, the spacer is inside the installation joint without this being able to affect the integrity of it in the future.
The professional planer is very aware of the importance of using high quality separators, since the finish of his work can be seriously damaged due to imperfections and irregularities.
The RUBI spacers stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who trust in RUBI crossheads, T and wedges to obtain excellent finishes and with total precision.
RUBI is committed to quality. All our products and tools are subjected to rigorous quality exams by experienced professionals. We want all the products we have in the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to the professional of laying ceramic tile and construction.
Reference: 05990
Product Code: 05990 Size: 10mm Revolutions per minute: 14000 max Maximum drill length: 36mm Dry drilling; wall tile, stoneware, and porcelain tiles. Maximum operating speed 14,000 rpm M14 thread finish. Usable with a grinder (direct connection) or electric drill
Reference: 7896
Quick and simple application Ready to use Removes surface residues of cement, lime and efflorescence Use the day after grouting to remove light traces of remaining residues High performance Contact time (1-2 minutes) Use interior and exterior
Reference: KE111
Easy to apply Non-absorbent and easy to clean Certified anti-bacterial and mould-resistant Complies with HACCP food safety management procedures Helps keep the interiors more healthy Silver Grey Colour (111) For joints up to 15 mm wide 3KG
Reference: 35946
Product Code: 35946 Package Qty: 100 Easy & Quick to Use Facilitates The Laying Of Large Format Tiles Avoid Lippage & Improve Finish For Floors & Walls Thickness 3- 18mm
Reference: KEG2102
PRODUCT IDENTITY Type: powder Use: Floor Tiles Ideal for Underfloor heating Colour: grey and white Mixing ratio: 100 parts of powder with 24-26 parts by weight of water Consistency of mix: creamy paste Colour: grey and white Density of mix (kg/m): 1500 pH of mix: Approx. 11 Pot life: 30 minutes Application temperature range: From +5°C to +30°C...
Reference: 02858
Product Code: 02858 Package QTY: 100 11-20mm strips Easier to handle Easy, quick and intuitive use Reusable
Reference: 35949
Product Code: 35949 Cap Qty:100 Easier to handle No tool needed for installation Easy, quick and intuitive use
Reference: 02853
Product Code: 02853 Package QTY: 200 3-12mm strips Easier to handle Easy, quick and intuitive use Reusable
Reference: 02854
Product Code: 02854 Package QTY: 400 3-12mm strips Easier to handle Easy, quick and intuitive use Reusable
Reference: 02852
Product Code: 02852 Package QTY: 100 3-12mm strips Easier to handle Easy, quick and intuitive use Reusable
Reference: 1801
Product Code: 1801 Size: 8mm Drill Porcelain with Ease Integral Cooling Fast Drilling Wet or Dry
Reference: 35950
Product Code: 35950 Cap Qty: 300 Easier to handle No tool needed for installation Easy, quick and intuitive use
Reference: 03952
Product Code: 03952 Package QTY: 100 Wedges Reusable Easier to handle Easy, quick and intuitive use
Reference: KE123
Easy to apply Non-absorbent and easy to clean Certified anti-bacterial and mould-resistant Complies with HACCP food safety management procedures Helps keep the interiors more healthy Ancient White Colour (123) For joints up to 15 mm wide 3KG
Waterproof Use for cladding floors and walls Lightweight and easy to handle Ideal for electric under tile heating Kind to the environment - Zero Ozone depletion Easy to cut with hand saw to correct size, shape and around obstacles Good insulating properties helps reduce condensation Offers higher adhesion to tiles than either timber or plasterboard High...
Reference: 02911
Product Code: 02911 Size: 1mm Package Qty: 300 Quality base material, without impurities or imperfections Easier to handle
