Rubi Delta Level System Strip 3-12mm 3mm (B-100UN)

Product Reference
02866

 

  • Product Code: 02866
  • Packge QTY: 100
  • 3-12mm strips 
  • Easier to handle
  • Easy, quick and intuitive use
  • Reusable
Pack : £10.00
VAT included
Quantity

Description

The main function of the RUBI DELTA level system is to avoid lippage during the installation process tiles both on floors and walls.

The DELTA level system also prevents the movement of the tiles during the setting of the adhesive and during installation, the number of corrections in the position of the tile itself is reduced.

The basic principle of the DELTA level system is that of pressing the highest piece, until matching its position with the adjacent tiles, thus obtaining a substantial improvement of the surface flatness.

The use of the RUBI DELTA level system is fast, easy and intuitive. Once the installation is complete, the strips are removed by impact (kick or mallet), striking the strips always in the direction of the joint. The DELTA level system wedges can be reused many times.

The RUBI DELTA LEVEL SYSTEM pliers are designed to be used both in installation work of horizontal (floor) and vertical (wall) tiles.

The main function of the RUBI DELTA level pliers are to give the wedge the necessary pressure to allow the leveling of the tile; thus obtaining a perfectly flat surface.

Product Reference
02866
16 other products in the same category:

Reference: 1234

UltraTile Proclean Resin-Off

Designed to remove polymer hazes, films and residues from jointing mortars, resins and surface sealants Ready to use, gel-like formula Suitable for porcelain tiles and other porous natural and artificial stones Highly effective remover, works in less than 20 minutes Size: 1 litre bottle

Price Unit : £12.00
More
In stock

Reference: 35949

Cyclone Level System Caps (100UN)

Product Code: 35949 Cap Qty:100 Easier to handle No tool needed for installation Easy, quick and intuitive use

Price Pack : £26.00
More
In stock

Tile Backer Board 600x1200x6mm

Waterproof Use for cladding floors and walls Lightweight and easy to handle Ideal for electric under tile heating Kind to the environment - Zero Ozone depletion Easy to cut with hand saw to correct size, shape and around obstacles Good insulating properties helps reduce condensation Offers higher adhesion to tiles than either timber or plasterboard High...

Price Per Piece : £8.00
More
There are not enough products in stock

Reference: TGS01

Ultra Tile Pro Clean Tile & Grout Sealer 1L

Natural Matt Finish Impregnating Stone Sealer Professional Stain Protection Suitable For Interior & Exterior Use Protects Against Oil & Water Stains Premium Grade Breathable Sealer Size: 1 Litre Bottle

Price Unit : £25.00
More
In stock

Reference: RUB003

Rubi TX-1250 Max Tile Cutter

Cutting length - 125 cm Diagonal cutting length - 85x85 cm Cutting height - 3-21 mm Separator power - 1200 kg Weight with carrying case - 26 kg Units per box - 1

Price Price : £700.00
More
In stock

Reference: KE130

KERAPOXY EASY DESIGN JASMINE (130)

Easy to apply Non-absorbent and easy to clean Certified anti-bacterial and mould-resistant Complies with HACCP food safety management procedures Helps keep the interiors more healthy Jasmine Colour (130) For joints up to 15 mm wide 3KG

Price Unit : £45.00
More
In stock

Reference: 02902

Rubi 3mm Tile Spacers (200UN)

Product Code: 02902 Size: 3mm Package Qty: 200mm Quality base material, without impurities or imperfections Easier to handle

Price Pack : £3.00
More
In stock

Reference: 05990

Rubi Drygres Dry Cutting 10mm Diamond Drill Bit

Product Code: 05990 Size: 10mm Revolutions per minute: 14000 max Maximum drill length: 36mm Dry drilling; wall tile, stoneware, and porcelain tiles. Maximum operating speed 14,000 rpm M14 thread finish. Usable with a grinder (direct connection) or electric drill

Price Unit : £21.00
More
In stock

Reference: 35950

Cyclone Level System Caps (300UN)

Product Code: 35950 Cap Qty: 300 Easier to handle No tool needed for installation Easy, quick and intuitive use

Price Pack : £73.00
More
In stock

Reference: UM3521

MAPEGUARD UM 35

Waterproofing, uncoupling and anti-fracture membrane for cracked and damp substrates and substrates that are not fully cured before installing ceramic and stone tiles for internal and external surfaces without having to copy the layout of distribution joints in the substrate. TECHNICALDATA: Length: 30 m. Width: 1 m. Application: see technical Data...

Price Price : £230.00
More
In stock