Rubi 2mm Tile Spacers (300UN)

Product Reference
02901
  • Product Code: 02901
  • Size: 2mm
  • Package Qty: 300mm
  • Quality base material, without impurities or imperfections
  • Easier to handle
  • Ideal for floor tiles

Pack : £3.00
VAT included
Quantity

Description

The RUBI spacers are, without any doubt, a really indispensable range for obtaining perfect finishes in any installation work of ceramic tile.

RUBI manufactures spacers for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.


The spacers for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The massive structure of the spacers for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing. These properties make spacers for joints of 1, 1.5, 2 and 3 mm are highly recommended for coatings with ceramic tiles of large formats.

The L (long) versions of the 2 and 3 mm spacers are perfect, both for cladding and for paving with large-format or rectified ceramic tiles, with a thin joint.

The internal geometry of the spacers for joints of 3 mm long and 4 mm has been designed to provide greater resistance to bending and crushing. These properties make the spacers for joints of 3 mm long are highly recommended for coatings with large format ceramic tiles.

The internal geometry of the joints for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent their crushing. This hollow design facilitates the entrance of the joint mortar and, if the type of installation permits, leave the spacer inside the installation joint without affecting the integrity of the joint in the future.

The RUBI reinforced 5 mm spacers are crosspieces with greater rigidity, specially designed for use on large-format floor tiles. The underside of the reinforced 5 mm spacers is designed to offer a good settlement in the grip material and to facilitate, if the type of installation allows it, the spacer is inside the installation joint without this being able to affect the integrity of it in the future.

The professional planer is very aware of the importance of using high quality separators, since the finish of his work can be seriously damaged due to imperfections and irregularities.

The RUBI spacers stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who trust in RUBI crossheads, T and wedges to obtain excellent finishes and with total precision.

RUBI is committed to quality. All our products and tools are subjected to rigorous quality exams by experienced professionals. We want all the products we have in the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to the professional of laying ceramic tile and construction.

Product Reference
02901
16 other products in the same category:

Reference: KE130

KERAPOXY EASY DESIGN JASMINE (130)

Easy to apply Non-absorbent and easy to clean Certified anti-bacterial and mould-resistant Complies with HACCP food safety management procedures Helps keep the interiors more healthy Jasmine Colour (130) For joints up to 15 mm wide 3KG

Price Unit : £45.00
More
In stock

Reference: KEW2102

KERAQUICK EASY WHITE

 PRODUCT IDENTITY Type: powder Use: Floor Tiles Ideal for Underfloor heating  Colour: grey and white  Mixing ratio: 100 parts of powder with 24-26 parts by weight of water  Consistency of mix: creamy paste  Colour: grey and white  Density of mix (kg/m): 1500  pH of mix: Approx. 11  Pot life: 30 minutes  Application temperature range: From +5°C to +30°C...

From
Price Price : £18.00
More
In stock

Tile Backer Board 600x1200x6mm

Waterproof Use for cladding floors and walls Lightweight and easy to handle Ideal for electric under tile heating Kind to the environment - Zero Ozone depletion Easy to cut with hand saw to correct size, shape and around obstacles Good insulating properties helps reduce condensation Offers higher adhesion to tiles than either timber or plasterboard High...

Price Per Piece : £8.00
More
There are not enough products in stock

Reference: LS30

Kelmore LokStar Membrane - 30METER

TECHNICAL DATA: Pack size 30m rolls Material Polypropylene Membrane dimensions (length, width, thickness) 30m x 1m x 3.5mm Weight per m2 580g Resistance to water penetration (EN 13984) Class W1 Water vapour transmission properties (EN 1931) Sd >100m Minimum tile dimensions 50mm x 50mm Minimum tile thickness 5.5mm

Price Price : £240.00
More
In stock

Reference: KE123

KERAPOXY EASY DESIGN ANCIENT WHITE (123)

Easy to apply Non-absorbent and easy to clean Certified anti-bacterial and mould-resistant Complies with HACCP food safety management procedures Helps keep the interiors more healthy Ancient White Colour (123) For joints up to 15 mm wide 3KG

Price Unit : £45.00
More
In stock

Reference: 0010

Abacus Wet Room Waterproof Tanking Tape 10 Metre

Roll Length - 10m Roll Width - 120mm Use with Pro-SEAL Premix waterproof tape sealing compound For use with Elements shower trays and kits. Not for use on Acrylic Shower Trays and Baths

Price Unit : £35.00
More
In stock

Reference: UM3521

MAPEGUARD UM 35

Waterproofing, uncoupling and anti-fracture membrane for cracked and damp substrates and substrates that are not fully cured before installing ceramic and stone tiles for internal and external surfaces without having to copy the layout of distribution joints in the substrate. TECHNICALDATA: Length: 30 m. Width: 1 m. Application: see technical Data...

Price Price : £230.00
More
In stock