Delta Level System Strip 3-12mm 1.5mm (B-100UNO)
Made in PP
Strip: 1.5mm for tiles from 3 to 12mm
Bag quantities available: 100
The main function of the RUBI DELTA level system is to avoid lippage during the installation process tiles both on floors and walls.
The DELTA level system also prevents the movement of the tiles during the setting of the adhesive and during installation, the number of corrections in the position of the tile itself is reduced.
The basic principle of the DELTA level system is that of pressing the highest piece, until matching its position with the adjacent tiles, thus obtaining a substantial improvement of the surface flatness.
The use of the RUBI DELTA level system is fast, easy and intuitive. Once the installation is complete, the strips are removed by impact (kick or mallet), striking the strips always in the direction of the joint. The DELTA level system wedges can be reused many times.
The RUBI DELTA LEVEL SYSTEM pliers are designed to be used both in installation work of horizontal (floor) and vertical (wall) tiles.
The main function of the RUBI DELTA level pliers are to give the wedge the necessary pressure to allow the leveling of the tile; thus obtaining a perfectly flat surface.
Single lever basin mixer 260 with lever handle for wash bowls with push-open waste
White Wood Visual tiles is a wood-look stoneware collection in the 12,5x50 cm size which expands the warm, natural appeal of surfaces with an original personality into new living spaces, White Wood Visual tiles are one of the main important and elegant appearance for indoor and outdoor floor, capturing the beauty of natural timber and combining it with...